Polymeres Technologies

PTCI1-C1-1.5L

Chill Ice 1 Epoxy


$89.98

A low viscosity, optical quality, transparent epoxy resin. Ideal to fill cracks or river tables pours up to 1" thick. CHILL ICE #1 is perfect for bubble-free casting after less than 5 to 10 minutes without the use of a torch, which can cause an exothermic imbalance in the casting. Its long pot life of 500 minutes @ 22°C lets you cast several litres of resin, add a pigment, then slowly pour from a strategic corner of the mold, letting the resin fill it up. The high fluidity of CHILL ICE #1 lets you fill the mold or table river quickly for fast and easy levelling.

 

  • Ideal to fill cracks or river tables pours up to 1" thick.
  • 100% solids, no VOC
  • Easy mixing ratio of 2A/1B by volume.
  • Pot life of 500 minutes at 22°C.
  • Gets rid of bubbles quickly and easily without using a torch.
  • Easy to pigment.
  • ~48-72 hour @ 22°C setting time depending on volume, casting design, and ambient temperature.
  • Superior impact resistance.
  • Maximum optical quality.
  • High gloss.
  • High abrasion resistance.
  • Can be coloured with pigments or inks for transparent, translucent, or opaque colours.