BF Deep Resin 2:1

BF DEEP Resin is formulated for casting in a mold up to 2” Thick at 20˚ C/68˚ F, ready to de-mould and work in 7 days with full hardness in 21 days. With active cooling thicker casting without distortion is possible.

BF DEEP features a long set-up time for bubble release or removal and a moderate exothermic reaction with reduced shrinkage. 

BF DEEP is ideal for combining with wood in casting “river tables”.

Prime or seal wood surfaces with BF COAT Resin to eliminate bubbles forming before pouring thick castings.

Sealing wood surfaces is not required if you are able to cool the resin as it cures.

For large pours, we recommend a room temperature of 15C°/59F°, in addition to fans blowing on the surface as the resin cures.

Formulated non-hazardous and non-toxic.

PLEASE NOTE: 160G (606L) kit does not include free shipping due to the size of the containers; may also require 1-2 weeks leadtime to ship

Check Resin for Clarity before Mixing with Hardener.

The Resin component of your kit may turn milky or form crystals. This occurs much like honey crystallizes, this occurrence of milkiness crystals in no way affects the quality of the resin/ when warmed up will return to a clear liquid and so will the resin.

Put the container of Resin in a warm bath, (smaller containers can be warmed in the microwave for 2-3 minutes).

Slightly milky in colour - warm to 20-25°C (68-77°F) will clear the resin.

If larger crystals have formed then warm in a water bath to 45-50°C (115-125°F). This will restore clarity, you may be required to charge the water a few times to maintain the warmth, it will take around 30-40 minutes.

Do NOT exceed 70°C (160°F)
Higher temps will soften the container. Once the resin is clear, let it cool down to room temperature before mixing with Hardener.
If you have any questions please call 403-255-6044 Toll-Free 1-877-686-606