Black Forest Wood Co.  |  SKU: COATTHICK-BF-16OZ

COAT THICK Resin 1:1

$2895
Shipping calculated at checkout.
Size

Free Shipping on orders over $300.00 to Canada and Mainland USA (some exclusions apply)

Description

BF Coat Thick Resin cures to a clear high gloss finish which can be used to surface coat or cast projects up to 1/4" (6mm) thick. Coat has built-in air release properties and is UV stable; it is self-levelling and won't shrink or warp over time.

Should I use Coat Thick or Coat Thin?

The mention of "thick" and "thin" refers to the viscosity of the products.

Coat Thick is higher in viscosity allowing for more control of the product when coating a surface. When doing pigmented coatings, this prevents colours from bleeding together as easily.

Coat Thin is lower in viscosity making it more ideal for coating larger surfaces where you need the product to easily spread. It is also an ideal choice for crack filling as it will easily flow into small voids.

Max. depth of pour: 1/4"
Pot Life: 10-15 minutes
Cure Time @ 20℃/69℉: 24 hours
Coverage @ 1/8": 0.29 L/sq.ft

Uses and Applications:

BF Coat Resin is ideal for coating, gap filling and thin casting. It is a great primer/sealer to eliminate bubbles forming prior to casting live edges or porous materials when using BF Deep Resin.

ASTM Certified non-hazardous and non-toxic. Mix ratio 1 to 1

Check Resin for Clarity before Mixing with Hardener.

The Resin component of your kit may turn milky or form crystals; this occurs much like honey crystallizes. This occurrence of milkiness or crystallization in no way affects the quality of the resin! When warmed up, it will return to a clear liquid.


Put the container of Resin in a warm bath, (smaller containers can be warmed in the microwave for 1-2 minutes).

Slightly milky in colour - warming to 20-25°C (68-77°F) will clear the resin.

If larger crystals have formed then warm in a water bath to 45-50°C (115-125°F). This will restore clarity. You may be required to charge the water a few times to maintain the warmth, as it will take around 30-40 minutes.


Do NOT exceed 70°C (160°F)

Higher temps will soften the container. Once the resin is clear, let it cool down to room temperature before mixing with Hardener.
If you have any questions please call 403-255-6044 Toll-Free 1-877-686-6061

  • 5 stars: 11 (92%)
  • 4 stars: 1 (8%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
M
Mike P.
Good Quality

This is my go-to for starting and ending a piece using live edge wood. Easy to use, flows well despite being thick and dries quickly. Matches seamlessly with 2:1 Deep resin.

C
Cyril M.
Great Resin

Dries very clear with no bubbles. Easy to mix, excepts pigments very well. Great product for small castings and coating

T
Terry D.
Vintage archtop tailpiece

This product is really good. Thank you for your guidance.

K
Kaden G.

The epoxy cast very well with little to no bubbles

S
Sharon M.
This resin is wonderful. So much easier to work with than other brands.

I love this resin. It works perfectly for my wood and resin coasters and is a dream to use on resin and glass paintings as it gives me good open time. I also use it on my charcuterie boards and it works great. Thank you!!!

M
M.U.

First floor coat came out crystal clear, assume second will also. Shout out to sales desk in store and shipping department. They helped with my questions and got it to Ontario quickly.

R
Robert R.
BF Coat Thick 1:1

The Thick Coat product they sent was phenomenally easy to use and turned out fantastic. This was no small feat considering it was my first epoxy project and the amount of blunders I made along the way! Highly recommend (as well as their other epoxy products).

K
Keith
Works perfectly

Been using the resin for a while now and never had an issue. Easy to work with which is what I like most

T
Tallis D.
Good stuff!

This is some good quality resin, gets to a gel cure really fast, and I know it says full cure 6-8 hrs but I think at least 8 would be better. Just for a full hard cure. Resin is very clear when mixed properly and mixes well with pigments. Couldn't be happier! Shipping was also fast, although I'm only 3 hrs away.

F
Feda K.
So far so good

Bought this to try in some art projects. Stable so long as you’re not mixing too much at a time. Cures fairly well given the right temperature and humidity. Still testing but so far so good.

S
Shrikant

Super

R
Richard
Used for filling silhouette carvings in charcuterie boards.

I bought this resin to use with filling in carvings. I only needed a little bit for the project so I bought their smallest container to try out. I mixed a little according to their instructions. I mixed it with black metallic pigment (caviar) There was no smell, I filled a plastic syringe and used that to fill the carved out voids. It worked great! The resin cured very hard and made it easy to sand. It didn't gum up my sandpaper so thats good too.
Overall I'm very happy and will continue to use this product.
Thanks

B
BF C.T.R.1.

harden enough for a writing surface? want to use it on a desk

Black Forest Wood Co.

Yes! This resin has a hardness of approximatley 85D, plenty hard enough to right on without deformation.

Payment & Security

Payment methods

  • Apple Pay
  • Bancontact
  • Bizum
  • Discover
  • Google Pay
  • iDEAL Wero
  • Mastercard
  • MB WAY
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Black Forest Wood Co.

COAT THICK Resin 1:1

From $2895

BF Coat Thick Resin cures to a clear high gloss finish which can be used to surface coat or cast projects up to 1/4" (6mm) thick. Coat has built-in air release properties and is UV stable; it is self-levelling and won't shrink or warp over time.

Should I use Coat Thick or Coat Thin?

The mention of "thick" and "thin" refers to the viscosity of the products.

Coat Thick is higher in viscosity allowing for more control of the product when coating a surface. When doing pigmented coatings, this prevents colours from bleeding together as easily.

Coat Thin is lower in viscosity making it more ideal for coating larger surfaces where you need the product to easily spread. It is also an ideal choice for crack filling as it will easily flow into small voids.

Max. depth of pour: 1/4"
Pot Life: 10-15 minutes
Cure Time @ 20℃/69℉: 24 hours
Coverage @ 1/8": 0.29 L/sq.ft

Uses and Applications:

BF Coat Resin is ideal for coating, gap filling and thin casting. It is a great primer/sealer to eliminate bubbles forming prior to casting live edges or porous materials when using BF Deep Resin.

ASTM Certified non-hazardous and non-toxic. Mix ratio 1 to 1

Check Resin for Clarity before Mixing with Hardener.

The Resin component of your kit may turn milky or form crystals; this occurs much like honey crystallizes. This occurrence of milkiness or crystallization in no way affects the quality of the resin! When warmed up, it will return to a clear liquid.


Put the container of Resin in a warm bath, (smaller containers can be warmed in the microwave for 1-2 minutes).

Slightly milky in colour - warming to 20-25°C (68-77°F) will clear the resin.

If larger crystals have formed then warm in a water bath to 45-50°C (115-125°F). This will restore clarity. You may be required to charge the water a few times to maintain the warmth, as it will take around 30-40 minutes.


Do NOT exceed 70°C (160°F)

Higher temps will soften the container. Once the resin is clear, let it cool down to room temperature before mixing with Hardener.
If you have any questions please call 403-255-6044 Toll-Free 1-877-686-6061

Size

  • 473ml (16 US OZ)
  • 1.9L (64 US OZ)
  • 3.8L (1 US Gal)
  • 7.6L (2 US Gal)
View product