Ceramic Finishing Kits

wish it was a little cheaper in price but great product

The base and top coat was simple to apply and covers plenty. Will buy more in the future!

Definitely follow the directions. It goes on unlike any other finish I've used. I can't speak to it's long-term wear, but it made the surface way smoother and gave it a slick feel. It increased the sheen as well, but without looking plastic. It does indeed significantly increase it's ability to repel water, which is the main reason I bought it. The table that I put this on will be in a household with kids. This should help defend the top from those little monsters.

I’m just a hobbiest with many hobbies and decided to try something with wood and epoxy. Shipping was quick. Application was easy and looks great. I applied 3 coats of base and top coat.

I have had great success using the Black Forest ceramic coating on all my tables. I have ordered this product many times and love the product. I have not had anyone complain about excess wear on the tops of my tables. Great product.

Used it on a couple live edge coffee tables and they turned out great. Started with Rubio monocoat and added the ceramic on top

I have tried different oils and rubs on my wood countertops but they continued to get stained. I used the oil and the platinum ceramic coat and the countertops are beautiful. So far, no stains, and easy cleanup.

Finally finished a table project that means a lot to me. The table is actually a door that saved the lives of my friend Brian and me, during a house fire, in the middle of Hurricane Irma. The house explode as we entered, and the pressure wave picked us up and threw us both out the door. This door slammed shut and the entire 3500-square-foot house disintegrated. The door truly saved our lives. I was looking for a product that would help protect what I have worked so hard on, and this is it! I couldn’t be happier with the results. Full story and video: https://youtu.be/NFySk6k7kks.

If your like me and high gloss finishes aren’t for you, you may like this finish. Easy to apply and it gives a nice satin finish. Two coats of the diamond and one top coat and you’re good to go. Check out the videos from Black Forest. The product seems expensive but you use very little.

I bought this to try on a few smaller boards (1 pic below), to see how it performs, prior to using it on larger projects; coffee/dining tables. The directions and tutorial video were quite helpful, and the application itself was very easy. I did not notice much of a bump in sheen, at all, but the surfaces of all three boards (2 walnut & epoxy, and 1 Maple burl & epoxy [shown]) are definitely much more slick to the touch. Upon it curing, I intentionally spilled a small amount of water on one of the boards, and yes, the water beads up and is easily cleaned/removed. I'll definitely be using this product moving forward. In a word; amazing! The boards were finished with Odie's Oil, and 2 separate base coat applications, and a single top coat were applied, with their respective cure times in between.

Delivery was on time. as promised. I have only used it once. I make "river" bowls to compliment river tables. I applied the product as directed -- 2 coats of Platinum graphene and 1 of top coat. I just followed the directions and buffed the coats as directed. Here is a photo of the finished bowl - this was my prototype and there are a few blemishes that the photo may show..
Alan

I built a hickory slab table sanded to 320 grit smoothness and initially treated the wood with 3 coats of Rubio. My main reason for using the Black Forest products was to improve water and stain resistance. I had a couple of pieces of the same wood that I used a test samples also with 3 coats of Rubio. The Rubio by itself provided a nice finish, but when I did a water test by placing a few drops of water under a glass and leaving it for 1 hr, a light but noticeable ring was present that would require some minor work to remove. I applied the Black Forest products (2 coats of both base and top coat) and waited 5 days for a cure time, then did another test on another sample. The water resistance was improved, but there were still some very minor water marking. Not what I had hoped for, but good enough. The stain resistance was very good, with wine and beet juice being easily cleaned from the surface.
The black forest products did not change the sheen when compared to the Rubio finish, did improve water resistance, but did not make the wood surface impervious by any means. When applying per the instructions there just isn’t enough product to penetrate the pores if the wood to provide the ultimate seal. Expensive. I don’t think I’d buy again due to the cost

Worth the extra time and effort to apply this to high-end projects. https://youtu.be/_Ec1QdM07bg

I bought it a while back and it did take a long time to get in. It just came out so not entirely surprised. Watched the company video and applied it to my epoxy River table. Wow. Water beads up on it so it’s ready for the grandkids. I out it over Rubio Monocoat. I’ll use it on future projects.

Put a few coats on and noticed it gave a nice finish.

Very easy to apply. I was amazed with the finish afterwards. Black forest ceramic will be my go to finish for all my future projects.

First time I use it and so far looks very good I really recommend it I will use it again and again and again thank you black forest

I had learned about this from a local Youtuber/woodworker, and had a piece I was finishing up myself. So I ordered it to give it a shot. This was by far the quickest, and easiest step out of the whole project, LOL. This is now the final step in every project!! This piece was a Siberian Elm slab. Sorry, but the pictures don't do it justice.