Hope Woodturning  |  SKU: ESTJ-M33-10

Easy Set Threading Jig

$45095
Shipping calculated at checkout.
Spindle Thread

Free Shipping on orders over $300.00 to Canada and Mainland USA (some exclusions apply)

Description

NEW MK 2 THREADING JIG IS NOW SOLD AS STANDARD. THE NEW JIG HAS A BUILT-IN HINGE PLATE AND IMPROVED PERFORMANCE. PLEASE CHECK THE 65MM MINIMUM MEASUREMENT NEEDED AS PER PICTURE IN IMAGES.

Its called the easy-set threading jig because the depth of cut is easily controlled by twisting the silver round handle clockwise to push the main body into the cut.

The handle has an internal click system so 9 twist clicks gives you the depth for the 12 tpi , 7 twist clicks gives you the depth for the 14 tpi, 5 twist clicks gives you the depth for the 16 tpi and 3 twist clicks give to the depth for the 20 tpi.

The handle on the back gives a 6" swing so you can rotate under control easily.

The 20, 16 ,14 and 12 tpi parts are machined with the front lathe spindle thread out of one piece.

This gives ultimate accuracy unlike systems where the thread adapters have to be attached to a common holder.  

The Threading Jig includes the 16mm thread cutter and the hinge plate.

The standard configuration of the Threading Jig is 16 tpi and 1" Tool Post.  

Options:

You can choose a different tpi option to cut other thread pitches and a different tool post diameter.  

There are also Extra Spindles (Stems) available that enable you to cut other thread pitches with the Jig. 

You can also get an extra spindle/stem to cut the thread size of your lathe spindle enabling the direct mount of wood on the lathe spindle.

There are three options for holding the cutter: grip the cutter shaft in your chuck, use the optional MT2 Draw Bar Holder or the optional Spindle Cutter Holder that threads directly onto the spindle of your lathe.

**Please read the following if ordering:

The jig comes with a 1" tool rest post (stem) as standard. 5/8"(16mm), 3/4"(19mm), and 30 mm are also available on request when ordering. If you have any questions, or don't see the option you require, please give us a call at 403-255-6044 or toll free at 1-877-686-6061 or email ben@blackforestwood.com or tim@blackforestwood.com

  • 5 stars: 11 (92%)
  • 4 stars: 1 (8%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
K
Ken W.
Great Product

Superior craftsmanship and easy to use. Provides excellent results for wood threading.

J
John S.
Hope Threading Jig

The Jig works just like I hoped it would. I had asked that the Jig be the new model with the hinge plate. I was told that is what would be supplied but that’s not what I received. Shipping was fast and delivery was no problem. Reduced the rating as I wanted the hinge plate version.

c
christophe P.

Very good service

A
Arthur G.
Easy threader

Very well engineered and easy to use

J
John E.
Good prroduct

Nice machine. Well built, should last for years. Just wish that it would pivit out of the way a bit farther. Customer service was great, worked through a problem with no problem...Thanks

M
Mike B.
Customer service

Customer service was amazing. Thanks Andy The threading jig has worked flawlessly as well.

G
Greg B.
Wonderful jig

New built in hinge to test fit is a wonderful upgrade. Makes it much easier to test fit and get right back into position if need to make more passes for that perfect fit. Jig is also very sturdy and stable with no slop. Black Forest was super friendly and helpful. Great experience all around!

s
sandy f.

Awesome tool. Awesome service

J
James T.
easy threading

As the title suggests, is easy threading.
And has good instructions on line.

J
John B.
Awesome jig.

Awesome jig easy to use and very accurate. Instructions booklet easy to follow.

G
Graham D.

It is easy to use with a very shallow learning curve. I tried several different woods including hard and soft maple, pear and osage orange. The hard maple and pear were the most successful but to be on the safe side, I used the same procedure as for soft maple as below.
I modified Simon Hope's instructions on YouTube a bit. With soft maple (similar to English sycamore that he uses) it is safest to apply super-glue before the first cut as he recommends. Use 2 clicks for the first cut, then apply more glue. Then use 2 clicks for the second cut followed by more glue before the single click for the final cut.

D
David M.
threading jig

It worked just as good as the demo.

Payment & Security

Payment methods

  • Apple Pay
  • Bancontact
  • Bizum
  • Discover
  • Google Pay
  • iDEAL Wero
  • Mastercard
  • MB WAY
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Hope Woodturning

Easy Set Threading Jig

From $44695

NEW MK 2 THREADING JIG IS NOW SOLD AS STANDARD. THE NEW JIG HAS A BUILT-IN HINGE PLATE AND IMPROVED PERFORMANCE. PLEASE CHECK THE 65MM MINIMUM MEASUREMENT NEEDED AS PER PICTURE IN IMAGES.

Its called the easy-set threading jig because the depth of cut is easily controlled by twisting the silver round handle clockwise to push the main body into the cut.

The handle has an internal click system so 9 twist clicks gives you the depth for the 12 tpi , 7 twist clicks gives you the depth for the 14 tpi, 5 twist clicks gives you the depth for the 16 tpi and 3 twist clicks give to the depth for the 20 tpi.

The handle on the back gives a 6" swing so you can rotate under control easily.

The 20, 16 ,14 and 12 tpi parts are machined with the front lathe spindle thread out of one piece.

This gives ultimate accuracy unlike systems where the thread adapters have to be attached to a common holder.  

The Threading Jig includes the 16mm thread cutter and the hinge plate.

The standard configuration of the Threading Jig is 16 tpi and 1" Tool Post.  

Options:

You can choose a different tpi option to cut other thread pitches and a different tool post diameter.  

There are also Extra Spindles (Stems) available that enable you to cut other thread pitches with the Jig. 

You can also get an extra spindle/stem to cut the thread size of your lathe spindle enabling the direct mount of wood on the lathe spindle.

There are three options for holding the cutter: grip the cutter shaft in your chuck, use the optional MT2 Draw Bar Holder or the optional Spindle Cutter Holder that threads directly onto the spindle of your lathe.

**Please read the following if ordering:

The jig comes with a 1" tool rest post (stem) as standard. 5/8"(16mm), 3/4"(19mm), and 30 mm are also available on request when ordering. If you have any questions, or don't see the option you require, please give us a call at 403-255-6044 or toll free at 1-877-686-6061 or email ben@blackforestwood.com or tim@blackforestwood.com

Spindle Thread

  • M33 x 3.5-with 10 tpi pitch
  • M33 x 3.5-with 12 tpi pitch
  • M33 x 3.5-with 14 tpi pitch
  • M33 x 3.5-with 16 tpi pitch
  • M33 x 3.5-with 20 tpi pitch
  • M30 x 3.5 tpi-with 12 tpi pitch
  • M30 x 3.5 tpi-with 16 tpi pitch
  • 1 1/4" x 8 tpi-with 10 tpi pitch
  • 1 1/4" x 8 tpi-with 12 tpi pitch
  • 1 1/4" x 8 tpi-with 14 tpi pitch
  • 1 1/4" x 8 tpi-with 16 tpi pitch
  • 1 1/4" x 8 tpi-with 20 tpi pitch
  • 1 1/2" x 6 tpi-with 12 tpi pitch
  • 1 1/2" x 6 tpi-with 16 tpi pitch
  • 1" x 8 tpi -with 12 tpi pitch
  • 1" x 8 tpi -with 16 tpi pitch
  • 3/4" x 16 tpi-with 12 tpi pitch
  • 3/4" x 16 tpi-with 16 tpi pitch
  • 1" x 8 tpi -with 8 tpi pitch
View product