BF Coat Resin cures to a clear high gloss finish which can be used to surface coat or cast projects up to 1/4" 6mm thick. Coat has built-in air release properties and is UV stable; it is self-levelling and won't shrink or warp over time.
Coat Thin was previously known as "Coat", and has a lower viscosity.
Max. depth of pour: 1/4"
Pot Life: 10-15 minutes
Cure Time @ 20℃/69℉: 24 hours
Coverage @ 1/8": 0.29 L/sq.ft
BF Coat Resin is ideal for coating, gap filling and thin casting. It is a great primer/sealer to eliminate bubbles forming prior to casting live edges or porous materials when using BF Deep Resin.
ASTM Certified non-hazardous and non-toxic. Mix ratio 1 to 1
Check Resin for Clarity before Mixing with Hardener.
The Resin component of your kit may turn milky or form crystals; this occurs much like honey crystallizes. This occurrence of milkiness or crystallization in no way affects the quality of the resin! When warmed up, it will return to a clear liquid.
Put the container of Resin in a warm bath, (smaller containers can be warmed in the microwave for 1-2 minutes).
Slightly milky in colour - warming to 20-25°C (68-77°F) will clear the resin.
If larger crystals have formed then warm in a water bath to 45-50°C (115-125°F). This will restore clarity. You may be required to charge the water a few times to maintain the warmth, as it will take around 30-40 minutes.
Do NOT exceed 70°C (160°F)
Higher temps will soften the container. Once the resin is clear, let it cool down to room temperature before mixing with Hardener.
If you have any questions please call 403-255-6044 Toll-Free 1-877-686-6061
