Welded Form - Rectangle

I’ve had this mold for about 2 months and have used it 3 times. Couple of things to consider or remember when using one of these. One being that there is a angle all around the mold. Meaning you will have seal access between or plan on pouring extra resin to compensate for what in the end will cut off and wasted, which on a 24x48 mold is considerable. The second is, if you are pouring deep (over 1”) you’ll have to make multiple pours with fans to keep the epoxy cool or risk deforming the mold. My pour using 3 to 1 epoxy, was about 1.5”. Heat created by my pour and deformation ended with hours of labor to save the piece. The mold is solid but Epoxy can generate a lot of heat and the mold is plastic, so you must be mindful to avoid the issues I’ve experienced. The mold in photos is elevated to better show the deformity.

So after starting my small time wood company i wanted something that i could re use i happen to order 3 from them in the past how ever one i ordered started to crack and is now unusable.
However they are good molds and being one of my main sellers i ordered 2 more to replace the one that broke, it was used about 20 times , though sprayed with mold release. but still the tapping over time cause the brake along the sides.. Im still thinking it was a flaw from the manufacture but i cant be sure.. Over all though i like the molds and i would say if you use them to spray the crap out of them with mold release to make the demolding super easy! i also added a pic of the mold that cracked you can see where it split in the corner and fractured out both ways...

Great product.

Very easy to use. Does what is advertised. Love these molds!

The product worked fine. However, I needed to shorten the length and it would have been nice to have a pre cut piece of your material to do so.
The size I ordered was a bit too big and the next size down was a bit too .
The slant in the walls made it necessary to do a lot of sanding of excess epoxy around the top.

This product worked as advertised. Epoxy can easily be removed. I liked it enough to order 3 more.

Made two boards already. Works great.

Awesome product!! Works just as intended.

Nice quality

Fast shipping

Works very well

This product at the very least is a time saver. There is no need to build a form for the material and it is a money saver also because it saves you the expense of having to build a form and then dispose after one or two uses, the only downside to that is that it is one size but you know that before you start and there are other sizes available. I highly recommend this product.

Amazing quality! Fantastic mold!

This mold arrived fairly quickly and was the perfect size. I’m just beginning with wood and epoxy projects and this made the process a snap. Once cured it comes right out with a few love taps. Just follow the instructional video and you should have no problems. I will order more in the near future.

Great quality

Worked amazingly

After doing a second 24” x 48” wood/epoxy pou using the mold, this time with mold release, the cured piece popped right out. The time and cost savings in having reusable molds is great. Very pleased with this shop tool.

The molds work well, however, I did not use mold release on first two projects and had a difficult time getting projects out after cure. As I fear the molds breaking from the needed pounding to Demond, I will use mold release in the future.

This thing worked GREAT!

The mold worked perfectly the first time that I used it!!!

Awesome product